Replacing a part is the easy half of any HVAC call. The useful half is understanding what put that part under enough stress to fail in the first place. A capacitor that burns out on a five-year-old system is a different conversation from one that goes on a fifteen-year-old unit that has been running hard through Gulf Coast summers since it was installed. The repair itself might look identical. The advice that follows it should not.
Pickett Heating & Air handles heating and cooling calls across Dickinson for homeowners, rental property owners, and commercial operators who need a straight answer about what is wrong and what it will take to fix it. Same-day service is often available, and every call starts with a price confirmed before anything is scheduled. Work is performed by qualified HVAC technicians who test the system before they sign off.
A high SEER rating on a new system is a starting point, not a guarantee. What a property actually sees once the equipment is installed depends on factors the rating does not account for: duct condition, how well the system is sized to the space, how much air is leaking before it ever reaches the rooms being cooled, and whether the controls are calibrated to match how the building is actually used.
In a Gulf Coast climate where the cooling load is heavy for most of the year, those gaps add up. An oversized unit short-cycles instead of running long enough to pull humidity out of the air. An undersized one runs constantly and still falls short on the hottest afternoons. Getting the efficiency a system is rated for means matching the equipment to the building correctly, sealing the duct system, and verifying airflow before the job is closed out.
That is why we run a full system test on every installation and replacement. The system tested and readings checked before sign-off is not a formality. It is how we confirm the equipment is actually performing the way it should.
When certain rooms run warm while others are comfortable, the problem is often in how airflow is distributed rather than in the equipment itself. Dampers, register positions, and duct branch sizing all affect where the air ends up. Rebalancing the system redirects airflow to where it is needed without requiring new equipment.
Low or absent airflow usually points to a restriction somewhere in the system: a collapsed duct section, a blower that is underperforming, a coil that has iced over, or a filter that has not been changed in too long. We trace the restriction before recommending a fix, because the symptom is the same regardless of the cause.
A system low on refrigerant does not just cool less effectively. It runs harder to compensate, which accelerates wear on the compressor. We locate the leak, repair it, and recharge the system to the correct level. Topping off without finding the source is a short-term answer that leads to the same call again.
Even in a region where heating calls are less frequent than cooling calls, a heating system that will not light or that shuts down mid-cycle is a genuine problem when temperatures drop. Ignition and flame sensor faults are among the more common reasons a system fails to produce heat. They are usually diagnosable and repairable in a single visit.
A home where the thermostat reads one temperature and a back bedroom reads another is often dealing with duct losses, inadequate return air, or a system that was never sized correctly for the full square footage. Zoning and comfort-control systems can address this in cases where the ductwork supports it. We assess what the layout allows before recommending a path.
Hard freezes are rare in this region, but when temperatures drop far enough to matter, a heating system that is not working is not something to wait on. No-heat calls are handled as emergency service. We answer those calls every day from 7:30 AM to 11:00 PM.
The price on a repair or replacement call reflects what the job actually involves once a technician has looked at the system. What the fault turns out to be, where it is located, how accessible the equipment is, and whether a repair makes more sense than a replacement are the things that move a quote in one direction or another.
For a repair, the diagnosis comes first. We identify the fault, explain what caused it, and give you the price before any work begins. For a replacement, the sizing calculation and equipment selection happen before a number is confirmed. A system that is matched correctly to the space costs less to operate and performs more consistently than one that was selected by price alone.
You get the rate on the phone. Nothing is scheduled until the price is agreed. Call us and we'll walk you through your options.
A repair call usually starts with something the homeowner has already noticed: the system is running but not cooling, there is a noise that was not there before, or the unit has stopped responding to the thermostat. Some of those turn out to be simple. Others point to a problem that has been developing for a while. Either way, the diagnosis comes before the recommendation, and the recommendation comes before any work is authorized.
A seasonal tune-up is not about fixing something that is broken. It is about catching what is about to break before it does. A coil that is starting to restrict airflow, a capacitor that is reading low, a drain line that is beginning to back up. In a climate where the cooling system runs for most of the year, deferred maintenance has a way of turning into an emergency call during the hottest stretch of summer, when appointment availability is tightest. Scheduling ahead of the season is the better call.
Some systems reach the point where the repair cost and the remaining useful life no longer add up in favor of fixing it. An aging unit that is requiring repeated calls, struggling to hold the set temperature, or running constantly without keeping up is telling you something. When that is the situation, we explain both paths honestly and let you decide with accurate information. The service page carries the full breakdown of what a replacement involves from estimate to final test.
For homeowners and property managers who want it done right, knowing what the replacement covers before committing to it is the right starting point. That is what the call is for.
Same-day appointments are often available for both repair and diagnostic calls in Dickinson. When a system is completely down with no cooling or no heat, we treat that as an emergency and work to get a technician out the same day. We are available every day from 7:30 AM to 11:00 PM.
For rental properties and commercial spaces that need to stay occupied or operational, we work around the situation. A property manager who cannot be on site can designate a tenant contact. A business that cannot shut down during a repair gets scheduled with that constraint in mind. Let us know the setup when you call and we will figure out the best way to handle it.
Appointments are confirmed before the visit. You are told what to expect and what the technician will be looking at. Clear communication from the first call to the final test is how every job runs, whether it is a quick repair or a full system replacement.
HVAC work here gets handled by people who answer to this community.
We cover Dickinson and the surrounding communities throughout Galveston County. That includes League City, Santa Fe, Bacliff, Kemah, and Clear Lake Shores. If you are in this part of the county and need heating or cooling service, we can get someone out to you.
Residential calls, rental property calls, and commercial service calls across the area are all handled the same way: a qualified technician on the job, the price confirmed before work begins, and the system tested before sign-off.
For what the job actually entails, our HVAC service guide lays it out.
We are available every day from 7:30 AM to 11:00 PM. If your schedule or the property's situation requires a visit outside typical business hours, call us and we will work out what is available.
Often, yes. When you call, we ask about what the system is doing, how long it has been happening, and whether anything changed before the problem started. That conversation helps the technician arrive with a clearer picture, which makes the diagnostic visit more efficient.
The technician explains the options in plain terms at the close of the diagnostic visit, covering what the repair involves, what it costs, and how that compares to replacement given the condition of the system. If you want that information confirmed before you decide, ask when you call and we will make sure it is part of the conversation.
High humidity is a consistent factor in Gulf Coast climates, and it affects comfort in ways that temperature alone does not capture. A system that is cooling the air to the right temperature but not removing enough moisture will still feel uncomfortable. If your home feels sticky even when the AC is running, the issue may be related to system sizing, runtime, or airflow rather than a mechanical fault. A diagnostic visit can identify whether a whole-home dehumidifier or a system adjustment is the better answer.
Yes, and the period just before peak demand is the best time to do it. A pre-season tune-up catches worn components, low refrigerant, and airflow problems before the system is running hard every day. Scheduling before the busy season also means appointment availability is easier to work around.
Sometimes, but not always. Mismatched equipment, where one component is new and the other is near the end of its useful life, can create efficiency and compatibility problems. The technician looks at the age, condition, and compatibility of both components and gives you a straight comparison of the options before you decide.
Additions and converted spaces are a common source of comfort complaints because the original duct system was not designed to reach them. Whether a mini-split ductless system, a duct extension, or a zoning adjustment is the right answer depends on the layout and what the existing equipment can support. We assess the situation during the visit and explain the options before recommending anything.
When you book, we confirm the appointment details including the expected window for the visit. You are told what to expect before the day arrives so you can plan around it.
Pickett Heating & Air handles heating and cooling repair, installation, and service across Dickinson and the surrounding area. Call (346) 686-2935 for a quote. The rate is confirmed on the phone, the price is agreed before anything is scheduled, and nothing is replaced until you have said yes to the number in front of you.
Nearby towns we cover: League City, Webster, Texas City.
We handle the full range of heating and cooling work in Dickinson and the surrounding Galveston County area, from a single repair call to a complete system replacement. The table below lays out what each service covers, who it fits best, and a practical note to help you decide where to start. Every job runs the same way: a clear price before anything is scheduled, work performed by qualified HVAC technicians, and the system tested before we close out. Call for a quote and we will walk you through your options.
| Service | What's Included | Best For | Helpful Details |
|---|---|---|---|
| Ductwork Repair & Sealing | full duct system inspectionleak and gap sealingdamaged section repair or replacementairflow confirmation after work | Homes with uneven temperatures, high energy bills, or a system that runs constantly without reaching the set point | In a climate where cooling runs from late spring through early fall, duct losses add up fast on the energy bill |
| Emergency HVAC Service | same-day dispatch when availableno-heat and no-cool callssystem-down diagnosis and repair | Any situation where a system failure is affecting health or habitability right now | We answer emergency calls every day from 7:30 AM to 11:00 PM |
| Full System Installation & ReplacementMost Popular | load calculation and equipment sizingfull removal of old systemnew system installation and connectionperformance test before sign-off | Homeowners and property managers replacing an aging or failed central HVAC system | Proper sizing matters more than brand in a high-run-hour climate like Dickinson, where an oversized or undersized unit costs more to operate |
| Whole-Home Dehumidification & Humidity Control | dehumidifier sizing for the homeinline installation with existing HVACindependent humidity-cycle operationintegration verification before sign-off | Coastal Galveston County homes where humidity is a year-round condition, not just a summer problem | A whole-home dehumidifier runs independently of the cooling cycle, so humidity stays controlled even when the AC is not running |
| AC Repair & Service | refrigerant level checkcoil inspection and cleaningblower and airflow testingroot-cause diagnosis | Any home or rental where the AC is underperforming or not cooling at all | Same-day service is often available during the long Gulf Coast cooling season when calls come in early |
| Heating Repair & Service | heater not working diagnosiscontrol and thermostat testingairflow and heat exchanger inspection | Homes with a gas heating system that has stopped working or is struggling to keep up | Dickinson winters are mild but damp, so a heating system that runs infrequently can still fail when it matters most |
| Heat Pump Installation | load calculation and unit selectionfull installation and refrigerant chargecontrol wiring and thermostat setupsystem test and handoff | Dickinson homeowners replacing an older system or adding comfort to a new space where a heat pump covers both heating and cooling | Mild Gulf Coast winters make a heat pump one of the most efficient choices for year-round comfort in this area |
| High-Efficiency Central AC Replacement | accurate load calculationequipment selection by efficiency ratingfull system swap and installationfinal performance test before sign-off | Homes running an aging central AC that is driving up energy bills through a long cooling season | Higher efficiency ratings translate directly into lower operating costs when the system runs hard for eight or nine months of the year |
| Heat Pump Repair & Service | refrigerant charge checkreversing valve and controls testingcoil and air handler inspectionfull system performance test | Gulf Coast homes where the heat pump handles both cooling and heating year-round | Heat pump problems affect comfort in every season, so a prompt diagnosis prevents a small issue from becoming a bigger repair |
| Seasonal Maintenance & Tune-Ups | full system inspectionrefrigerant and coil checkcontrol and drainage testingairflow review | Homeowners and property managers who want to catch small issues before they become emergency calls | Spring is the best time to schedule a cooling-season tune-up in Dickinson before peak heat demand hits |
| Indoor Air Quality & Air Filtration | whole-home air filtration installationair purifier integration with existing systemmaintenance guidance before close-out | Households concerned about dust, airborne particles, or air quality in a humid coastal climate | We protect floors and finishes during indoor installation and explain how to maintain the system before we leave |
| Thermostat & Smart Control Installation | compatibility check with existing systemwiring and mountingsetup and scheduling walkthrough | Homeowners upgrading from a basic thermostat or dealing with a control that reads temperatures incorrectly | Heat pump systems require specific wiring configurations, so compatibility is confirmed before any equipment is ordered |
Call (346) 686-2935 to get a quote, confirm the price before anything is scheduled, and get the job on the calendar.
(346) 686-2935