Commercial properties, rental units, and small businesses in Texas City keep HVAC systems running hard. When a rooftop unit goes down on a retail space, or a landlord gets a call that a tenant has no cooling, the situation needs someone who can get out quickly, diagnose accurately, and explain what the repair involves before touching anything. That is where Pickett Heating & Air comes in. We handle the heating and cooling side of properties of all kinds across Texas City, and we answer the phone every day from 7:30 AM to 11:00 PM.
For homeowners, the call usually sounds different but the need is the same: a system that stopped working, one that runs all day without satisfying, or equipment that has been on its last legs for a season too long. We handle repairs, tune-ups, full system replacements, and everything in between. The price is confirmed before anything is scheduled, and work is performed by qualified HVAC technicians who test the system before they leave.
When a system fails and a replacement is the right call, the instinct is often to match what was already there. Same brand, same size, move on. That approach skips the step that matters most, which is whether the original system was ever sized correctly for the property in the first place.
Load calculations account for square footage, ceiling height, insulation, window exposure, and how the space is used. A system that was oversized from the start will short-cycle and struggle with humidity even when it is brand new. One that was undersized will run constantly and never reach the set point. Getting the replacement right means starting with an accurate picture of what the space actually needs, not what was there before.
We walk through the sizing process when you call for a quote. You get a clear explanation of what the new system will handle and why the recommendation is what it is. Call us and we'll walk you through your options.
Not every HVAC call is the same kind of problem, and the situation that leads to the call shapes what happens next. Here is how the work typically divides.
A repair call usually starts with something the occupant noticed: no cooling, weak airflow, strange sounds, or a system that turns on and off without doing anything useful. The diagnostic visit identifies what actually failed rather than working from assumptions. That might be a refrigerant issue, a failing component in the air handler, a control problem, or something in the duct system restricting airflow. We explain what was found before any repair begins, and the system is tested before we sign off.
A system that is working today is not necessarily working well. Seasonal maintenance catches the things that degrade quietly: a coil that has accumulated enough buildup to reduce efficiency, a blower that is drawing more power than it should, refrigerant levels that have drifted, or drainage that is starting to back up. In a climate where cooling runs for the better part of the year, deferred maintenance shortens equipment life and raises operating costs. A tune-up visit covers the full system and confirms readings before sign-off. The service page carries the full breakdown of what each visit includes.
Some systems reach a point where repair is not the right answer. Repeated failures in a short window, a compressor that is failing, or a system that cannot keep up with the load even when everything is working as designed are all signs that replacement is the more practical path. We give an honest assessment of where the system stands and what the realistic options are. For homeowners and property managers who want it done right, that means a clear comparison of repair cost against replacement value before any decision is made.
Most HVAC problems announce themselves before they become a complete failure. Knowing what to listen for is the difference between a repair call and an emergency.
The air handler and blower are responsible for moving conditioned air through the duct system and into the living space. When the blower motor starts to wear, airflow drops across the whole system, and the equipment works harder to compensate. A service visit checks the motor, the capacitor, and the blower wheel for buildup that restricts rotation. Catching a failing blower motor early keeps it from taking other components down with it.
Heat pumps in this region handle both the cooling load in summer and the heating load when temperatures drop. When a heat pump fails to switch modes correctly, runs without changing the temperature, or develops a defrost fault that leaves ice on the outdoor coil, the problem is usually in the refrigerant system, the reversing valve, or the controls. A diagnostic visit covers all of those. Don't let a small problem turn into a no-heat night or a no-cool afternoon when a call could have caught it earlier.
A system that runs all day and never brings the temperature down to the set point is working against something. That something might be a refrigerant shortage, a restricted or dirty evaporator coil, duct losses pushing conditioned air into unconditioned spaces, or a system that was never sized correctly for the load. We'll diagnose it, fix it, and test it before we leave.
A burning smell when a system first starts often points to dust burning off at the beginning of a season, but it can also indicate an electrical issue in the air handler or a motor that is overheating. A musty smell usually means biological growth somewhere in the system, most often on the evaporator coil or in the drain pan. Both are worth a call. Evaporator coil cleaning and inspection address the musty problem at the source and improve airflow at the same time.
Gas furnaces are uncommon in this part of Texas, so a no-heat call almost always involves a heat pump or a secondary heating element in an air handler. When a heat pump will not produce heat, the fault is usually in the refrigerant circuit, the reversing valve, or the auxiliary heat strip. We diagnose the specific cause rather than working through a checklist. HVAC work here gets handled by people who answer to this community.
The price on a repair call depends on what the fault turns out to be, where it is located in the system, and what parts are involved. A control issue in an accessible air handler is a different job from a refrigerant leak in a coil that requires the system to be recovered and recharged. For a replacement, the quote reflects the load calculation, the equipment selected, and what the installation involves at that specific property.
You get the rate on the phone before anything is scheduled. If the diagnosis reveals something that changes the scope, that gets communicated before the work proceeds. The service page carries the full breakdown of what each type of visit covers. Call today and we'll set up your appointment.
Same-day appointments are often available for both repair calls and diagnostic visits. Emergency calls, meaning a property with no cooling or no heating at all, are answered every day from 7:30 AM to 11:00 PM. For rental properties and commercial spaces where a tenant or business has to stay open, we work around the situation. Let us know the access arrangement when you call and we will plan accordingly.
You get a clear picture of what the visit covers when you book. Qualified HVAC technicians handle the work, and the system is confirmed running before sign-off on every call. For property managers scheduling across multiple units, that same process applies across the board.
Texas City is our focus here, and we also serve the surrounding communities throughout Galveston County. That includes San Leon, La Marque, Bacliff, Bayou Vista, and Tiki Island. Residential and commercial customers across the area can call for a quote, get the rate on the phone, and schedule without delays.
If you are in Texas City or anywhere nearby and need heating or cooling service, call (346) 686-2935. We are available every day from 7:30 AM to 11:00 PM.
the page on system repairs sets out the options.
Not always. If the existing ductwork is in good condition and sized correctly for the new system, it can remain in place. If the ducts are leaking, undersized, or damaged, addressing them at the same time as the equipment replacement makes sense because the performance of the new system depends partly on the condition of the duct system. The technician assesses the ductwork as part of the replacement process and explains what, if anything, needs to be done.
A clogged filter restricts airflow enough to cause symptoms that look like a system failure, so checking it first takes only a minute and costs nothing. If the filter is visibly clogged, replace it and give the system a short run to see whether the problem clears. If it does not, call us and we will take it from there.
High humidity in the Gulf Coast region puts additional strain on a cooling system because the equipment has to remove moisture from the air as well as lower the temperature. A system that is undersized, has a dirty coil, or is low on refrigerant will struggle more noticeably in humid conditions than it would in a drier climate. If your system is running hard but the indoor air still feels heavy and warm, that combination is worth a diagnostic call. A whole-home dehumidifier can also take pressure off the cooling system by handling moisture independently.
Yes. The area we cover for installation and full replacement is the same area we cover for repair and maintenance. There is no separate territory for larger jobs.
In some situations, yes. If the system can be stabilized safely while a replacement part is sourced, the technician will explain that option and what it involves. Whether a temporary measure is appropriate depends on what failed and how the system is responding, and that determination is made on-site rather than in advance.
Access to the property is what matters, not whether it sits within a city boundary or on a public road. If the address is within the area we cover and the technician can reach the equipment, we can take the job. Call us with the address and we will confirm coverage.
The process is the same for each unit: a price confirmed on the phone before anything is scheduled, a qualified technician on the job, and the system tested before sign-off. For properties where tenants need to be present or where access has to be coordinated, let us know the arrangement when you call and we will work around it. Same-day appointments are often available, and emergency calls for units with no cooling or no heating are answered every day from 7:30 AM to 11:00 PM.
Sometimes, but not always. Mismatched equipment, where one component is new and the other is near the end of its useful life, can create efficiency and compatibility problems. The technician looks at the age, condition, and compatibility of both components and gives you a straight comparison of the options before you decide.
Pickett Heating & Air handles heating and cooling repair, installation, and service across Texas City and Galveston County. Once a qualified technician has looked at the system, you get a straight answer about whether a repair makes sense or whether replacement is the better call. That is the information that makes the decision straightforward.
Call (346) 686-2935 for a quote. Book today. Running tomorrow. Comfortable by the weekend.
Nearby towns we cover: Dickinson, League City, Webster.
We handle the full range of heating and cooling work in Texas City and the surrounding Galveston County area, from a single repair call to a complete system replacement. The table below lays out what each service covers, who it fits best, and a practical note to help you decide where to start. Every job runs the same way: a clear price before anything is scheduled, work performed by qualified HVAC technicians, and the system tested before we close out. Call for a quote and we will walk you through your options.
| Service | What's Included | Best For | Helpful Details |
|---|---|---|---|
| Ductwork Repair & Sealing | full duct system inspectionleak and gap sealingdamaged section repair or replacementairflow confirmation after work | Homes with uneven temperatures, high energy bills, or a system that runs constantly without reaching the set point | In a climate where cooling runs from late spring through early fall, duct losses add up fast on the energy bill |
| Emergency HVAC Service | same-day dispatch when availableno-heat and no-cool callssystem-down diagnosis and repair | Any situation where a system failure is affecting health or habitability right now | We answer emergency calls every day from 7:30 AM to 11:00 PM |
| Full System Installation & ReplacementMost Popular | load calculation and equipment sizingfull removal of old systemnew system installation and connectionperformance test before sign-off | Homeowners and property managers replacing an aging or failed central HVAC system | Proper sizing matters more than brand in a high-run-hour climate like Texas City, where an oversized or undersized unit costs more to operate |
| Whole-Home Dehumidification & Humidity Control | dehumidifier sizing for the homeinline installation with existing HVACindependent humidity-cycle operationintegration verification before sign-off | Coastal Galveston County homes where humidity is a year-round condition, not just a summer problem | A whole-home dehumidifier runs independently of the cooling cycle, so humidity stays controlled even when the AC is not running |
| AC Repair & Service | refrigerant level checkcoil inspection and cleaningblower and airflow testingroot-cause diagnosis | Any home or rental where the AC is underperforming or not cooling at all | Same-day service is often available during the long Gulf Coast cooling season when calls come in early |
| Heating Repair & Service | heater not working diagnosiscontrol and thermostat testingairflow and heat exchanger inspection | Homes with a gas heating system that has stopped working or is struggling to keep up | Texas City winters are mild but damp, so a heating system that runs infrequently can still fail when it matters most |
| Heat Pump Installation | load calculation and unit selectionfull installation and refrigerant chargecontrol wiring and thermostat setupsystem test and handoff | Texas City homeowners replacing an older system or adding comfort to a new space where a heat pump covers both heating and cooling | Mild Gulf Coast winters make a heat pump one of the most efficient choices for year-round comfort in this area |
| High-Efficiency Central AC Replacement | accurate load calculationequipment selection by efficiency ratingfull system swap and installationfinal performance test before sign-off | Homes running an aging central AC that is driving up energy bills through a long cooling season | Higher efficiency ratings translate directly into lower operating costs when the system runs hard for eight or nine months of the year |
| Heat Pump Repair & Service | refrigerant charge checkreversing valve and controls testingcoil and air handler inspectionfull system performance test | Gulf Coast homes where the heat pump handles both cooling and heating year-round | Heat pump problems affect comfort in every season, so a prompt diagnosis prevents a small issue from becoming a bigger repair |
| Seasonal Maintenance & Tune-Ups | full system inspectionrefrigerant and coil checkcontrol and drainage testingairflow review | Homeowners and property managers who want to catch small issues before they become emergency calls | Spring is the best time to schedule a cooling-season tune-up in Texas City before peak heat demand hits |
| Indoor Air Quality & Air Filtration | whole-home air filtration installationair purifier integration with existing systemmaintenance guidance before close-out | Households concerned about dust, airborne particles, or air quality in a humid coastal climate | We protect floors and finishes during indoor installation and explain how to maintain the system before we leave |
| Thermostat & Smart Control Installation | compatibility check with existing systemwiring and mountingsetup and scheduling walkthrough | Homeowners upgrading from a basic thermostat or dealing with a control that reads temperatures incorrectly | Heat pump systems require specific wiring configurations, so compatibility is confirmed before any equipment is ordered |
Call (346) 686-2935 to get a quote, confirm the price before anything is scheduled, and get the job on the calendar.
(346) 686-2935